vendredi 25 mars 2011

COVER














not a big progression this week, in fact i'm working on another project in the same time so..... the wiring is nearly done, i'm waiting some last bits.today i've machined a cover for the pulley nut, best looking than the hexagon

mercredi 23 mars 2011

USUAL SUSPECTS, UPDATE

thanks to Arcadian, Pete and Spindle for the stickers, all from UK. re thanks to Pete for the title idea.

dimanche 20 mars 2011

WIRING part 1


started the wiring today, not my favorite job, especially when you've no place to put your fingers. if you know lucas regulators connections, you know what i say .

samedi 19 mars 2011

TRANSMISSION





installed the rear wheel and chain to check if no conflict, all seems correct.next step is the finish of the wiring, then i could put the bike on wheels.

vendredi 18 mars 2011

PRIMARY READY





little progs on the beezer, i 've finished the spare to lock the sprocket nut. now i can install the primary drive, it's OK but i'm not satisfied with the exentric system to move the box, very hard to operate, will see. i did some modifications on the breather cause there's a conflict with the footpeg.

mercredi 9 mars 2011

SUN IS SHINING



but the weather is'nt sweet for the moment . today , cleaning the "garage" it was time. it's more clear now.

mardi 8 mars 2011

FILTER DONE




this time it's good, the filter bracket is done. the filter is at the right place. now the oil chapter is closed. next step the primary drive.

lundi 7 mars 2011

OIL FILTER part 3





at last i found a solution to install the filter on the frame. after some unavailing tests. it' not totally finished at this time but will be good soon.

mardi 1 mars 2011

OIL FILTER part 2





little progress in the machining, the fittings are OK, the threaded dowel for the cartridge is OK too. now i must made 2 holes and tap them to fit the spare .